ACP department heading PARTS BIN
InTheGarageMedia.com
red box with arrow facing down and number 1
A grey with a rim
1. Skinny Bop
Forgeline announces the arrival of their new forged monoblock SC1 Skinny. Similar to their original one-piece forged monoblock SC1, the new “Skinny” version is precision-machined from a single forging of proprietary 6061-T6 aluminum alloy. Unlike the original street version, the “Skinny” has been reengineered for drag racing applications, which includes a narrower width and revised performance metrics to make it as lightweight as possible. It also retains the exceptional brake clearance of the original SC1.

For more information, contact Forgeline by calling (800) 886-0093 or visit forgeline.com.

red box with arrow facing down and number 2
A package of a nut starter
2. Unique Accessory Studs
ARP’s unique accessory studs with a rounded “nut starter” nose are available for an ever-increasing variety of applications, including specially designed studs for securing bellhousings, carburetors, distributors, headers, timing covers, valve covers, and more. They are available in polished stainless steel or black oxide finished 8740 chromoly and nominally rated at 180,000-psi tensile strength—20 percent stronger than Grade 8 hardware. Kits include a choice of hex or 12-point nuts and washers.

For more information, contact ARP by calling (800) 825-3045 or visit arp-bolts.com.

red box with arrow facing down and number 3
A kit with a a three bar MAP sensor, dual oxygen sensor
3. Big Power EFI
FiTech’s Ultimate LS systems just got better with 1,000hp support. Available for numerous LS heads, the trans control feature supports 4L60, 4L65, 4L80, and 4L85 transmissions. The kits come ready for boost with a three-bar MAP sensor and can be run with a single- or dual-oxygen sensor. The FiTech Fuel Injection Ultimate EFI kits come with a low-profile design and a 102mm inlet throttle body. They are fabricated with 3mm-thick aluminum sheetmetal and TIG-welded intake manifolds that support 1,500- to 6,500-rpm powerband up to 1,000 hp to the flywheel.

For more information, contact Fitech by calling (951) 340-2624 or visit fitechefi.com.

Tire and mechanical parts
red box with arrow facing down and number 4
A El Camino Hood Spear
4. Original-Style Spear
This ’66 Chevelle/El Camino premium hood spear reproduction is cast in authentic hard-tooled zinc (not softer pewter or brass) and is finished in a glossy chrome that is carefully polished for a brilliant surface. Mounting points are precise and guaranteed to fit perfectly.

For more information, contact Original Parts Group by calling (800) 243-8355 or visit opgi.com.

red box with arrow facing down and number 5
Classic Car Tire
5. Classic Muscle Car Tire
As good as the Firestone Wide Oval was, its bias-ply design was eclipsed by modern radial tires. Fortunately for classic muscle owners, Coker Tire decided to make the Wide Oval in a radial version to give you the retro looks plus the handling, safety, and longer tread life of a radial tire. Coker Firestone Wide Oval Radial Tires are designed and manufactured in the USA.

For more information call Summit Racing Equipment at (800) 230-3030 or visit summitracing.com.

red box with arrow facing down and number 6
S.O.S Ingition
6. S.O.S. Ignition
Performance Distributors introduces the S.O.S. (Sultans of Spark) ignition coils for LS applications. The new technology in these coils allows you to open your plug gaps to 0.065 inch, burning your fuel more completely, which leads to more power and performance. These Davis Unified Ignition S.O.S. coils produce 28,000 V under load compared to the stock 21,000. That’s 7,000 more volts under load per coil—56,000 V more over a stock ignition per engine. Mounting in the OEM location, the additional energy produced results in instant throttle response when you step on it.

For more information, contact Performance Distributors by calling (901) 396-5782 or visit performancedistributors.com.