ACP department heading PARTS BIN
InTheGarageMedia.com
Two-side Tacking, Injection Base, and High-Lift LS Springs
red box with arrow facing down and number 1
Two-side tacking
1. Two-Side Tacking

Design Engineering’s (DEI) Adhesive Transfer Tape is a very aggressive, pressure-sensitive, double-sided tape designed to bond substrates while maintaining a high tack level. Use it to attach heat and sound barrier materials without the need for a spray adhesive. Available in single- or dual-roll packs, the tape measures 3 inches wide and comes in 32-foot lengths. Providing a high-strength, long-term bond, it can be used for scrim reinforcement, as it resists water, condensation, and aging. It is temperature-resistant from -22 to 248 degrees F.

For more information, contact DEI by calling (800) 264-9472 or visit designengineering.com.

red box with arrow facing down and number 2
Injection Base
2. Injection Base

The Hilborn RAW “Race-And-Win” Injector is the classic racing unit for the standard Gen 1 small-block Chevy. These base intake manifolds fit small-block Chevy engines with ’55-86 262-400 or ’87-91 L98 Corvette-type cylinder heads, providing mounting for both RAW Hilborn mechanical and electronic stack fuel injection. The Hilborn EFI-R injector manifold kits combine the technology of electronic fuel injection with the racing-born performance and aggressive looks of individual-runner engine induction.

For more information, contact Holley by calling (866) 464-6553 or visit holley.com.

red box with arrow facing down and number 3
High-Lift LS Springs
3. High-Lift LS Springs
High-lift camshafts for LS engines are more the norm than the exception these days. Cams rated around 0.600 to 0.625 inches of valve lift are all over the place. You’ll need a good set of valvesprings to run one of those cams. Summit Racing Pro LS High-Lift Valve Springs are an inexpensive way to extend the engine’s operating range by around 1,000 rpm. The springs are a drop-in replacement for factory springs and come in sets of 16.

For more information, contact Summit Racing by calling (800) 230-3030 or visit summitracing.com.

Premium Magnetic Handheld Mount, JJ’s Rods & E-Z Firewall Rubber Boot Seals, and door contacts
red box with arrow facing down and number 4
Tube Bender
4. Tube Bender
ECI offers the most versatile tubing benders available for the hobbyist, chassis fabricators, prototyping, and short-run production applications. Their 4 in 1 tubing bender is capable of bending 3/16-, 1/4-, 5/16-, and 3/8-inch tubing up to 180 degrees at a 1-inch centerline radius. The 2 in 1 tubing bender handles 3/16– and 1/4-inch tubing and bends 180 degrees at an amazing 5/8-inch centerline radius.

For more information, contact Engineered Components by calling (860) 872-7046 or visit ecihotrodbrakes.com.

red box with arrow facing down and number 5
Wire Management
5. Wire Management

Lokar Performance Products is proud to announce the acquisition of the assets of Made-4-You Products (M4YP), a leader in the automotive aftermarket industry since 1985. M4YP’s product line consists of injection-molded line clamps, plug wire separators, and related wire and tube management products. Molded from nylon, these clamps and related parts will not fade, stain, or discolor and are impervious to automotive fluids.

For more information, contact Lokar
Performance Products by calling (877) 469-7440 or visit lokar.com.

red box with arrow facing down and number 6
Splined Sway Bar
6. Splined Sway Bar
Speedway Motors’ second-gen F-body front sway bar kit features a 38.6-inch-long 4130 chromoly steel splined antiroll bar that is 1.25 inches in outside diameter. Used with 0.188-inch wall hollow tubing to provide plenty of strength with reduced weight compared to a solid front sway bar, the sway bar kit arms are 11.75 inches long with two different mounting point options for the front sway bar links to adjust effective rate. A 50-degree bend keeps the arms tucked tight to the chassis for best possible tire clearance.

For more information, contact Speedway Motors by calling (855) 313-9173 or visit speedwaymotors.com/allchevyperformance.

Back to issue