



magine wanting a specific year, make, and model vehicle your whole life only to get ahold of one well into adulthood. Now imagine the feeling of starting the hunt for yet another car of the exact same ilk because you just can’t bring yourself to cut up and customize that first “dream” vehicle. Sometimes, these vintage cars show up in unbelievable original condition, and the simple thought of going forward with a complete breakdown for the purpose of installing aftermarket components can seem like committing a cardinal sin.
When he was finally old enough to drive, John picked up a 1969 El Camino SS 396, then a 1970 Camaro that he completely customized, followed by other equally cool muscle cars but never the ’69 Camaro that he once coveted during his youth. It wasn’t until he got a little bit older (we’ll let you do the math of his exact age) when he finally found the car he used to obsess over.





While his hopes were high for finding a project-worthy ’69, John canceled his search after three years of looking. He finally succumbed to the idea of blasting his all-original car apart to build the Camaro of his wildest dreams. “My good friend Sal Solorzano from Total Cost Involved helped with completely disassembling the car,” John says. “I felt a lot better about the situation once Solarzano began doing things to build the car back up, like installing a full TCI front suspension clip and rear torque arm setup.”
At least the Camaro wasn’t torn down in vain. John had a comprehensive plan for the project and was not about to settle for anything less than dream worthy. The new chassis situation was further upgraded with Ridetech adjustable shocks at each corner, powdercoated suspension components, Wilwood brakes, stainless lines, and plenty more to make the most of the next big addition to the Camaro’s roster.

Next, the Camaro was taken to Barry’s Speed Shop where it was bodyworked and painted a fresh custom green hue as an update to its original factory Frost Green color. New front and rear glass was then installed, a Detroit Speed RS headlight conversion kit was put into place, and all the stainless accents were polished to a brilliant shine. To match that luster, a set of 18-inch Schott wheels were selected to give John’s ’69 a moderately modernized yet classic appearance.
The interior was also treated to its own all-star list of amenities in the way of Cerullo race seats and headliner and package tray wrapped in supple black leather by Joe’s Upholstery. Del Ray Restomod was soon called in to install a custom stereo system and console, as well as new interior lighting to increase the appeal of nighttime driving.



Vehicle: 1969 Chevrolet Camaro SS
Type: 2021 Chevrolet Performance LS7
Displacement: 427 ci
Cylinder Heads: GM LS7 CNC-ported
Camshaft: GM hydraulic
Induction: MSD Atomic AirForce intake manifold
Assembly: RDZ Motorsports tuned by Westech Performance Group
Exhaust: Custom 3-inch stainless steel exhaust, MagnaFlow mufflers
Dress-Up: Eddie Motorsports accessory drive system, Eddie Motorsports hood hinges, Motion Raceworks valve covers
Fuel Tank: Rick’s Hot Rods steel 16-gallon tank, VaporWorx controller
Transmission: Chevrolet 4L75E four-speed automatic
Driveshaft: Inland Empire 3.5-inch steel
Rear Axle: Fabricated 9-inch
Chassis: Total Cost Involved
Rear Suspension: TCI Torque Arm system, 3/4-inch antiroll bar, 1 1/4-inch Panhard bar, Ridetech coilovers
Brakes: Wilwood 13-inch rotors, six-piston calipers, 1 1/8-inch master cylinder, CPP HydraStop brake assist
Wheels: 18×11 and 18×12 Schott Drift wheels
Tires: 295/30R18 and 335/30R18 Continental ExtremeContact SportPlus tires
Upholstery: Black leather by Joe’s Upholstery (Bellflower, CA)
Seats: Cerullo XR Sport Seats
Steering: Ididit tilt column, MOMO steering wheel
Instrumentation: Auto Meter Phantom 11 gauges
Shifter: B&M
Bodywork & Paint: Barry’s Speed Shop (Corona, CA)
Hood: 2-inch cowl hood
Grille: RS