Nick definitely had a good partner in his father who had already had cars featured in several magazines and won a number of awards for his spectacular Oldsmobile builds. Having Pop by his side would help give Nick the confidence he needed when tackling the build of his own high-powered, Chevy ride. Game on!

Over the next year, Nick and John started a frame-on restoration. The undercarriage was coated in POR-15, brakes rebuilt, fuel delivery gone over, and the front suspension rebuilt. They also partially disassembled the small-block to detail it and replaced the pushrods. After that minor surgery, the 350 ran like a top. The original paint was buffed out and a new set of wheels were added for a little bling at the corners. Luckily, the interior was in amazing shape and needed little to get it looking showroom new. “This was a fundamental time for me as it was my first step in muscle car education,” Nick states.

By the time the Camaro was ready, Nick was finally old enough to get his driver’s license. “This was monumental for me, as I drove the car everywhere from that point onward,” Nick recalls. However, during this time, the car was hit while parked at a friend’s house. Luckily, during his last Olds 4-4-2 build, John had become friendly with the crew over at Northpoint Restoration in Westbury, New York, and figured they would be the place to help put a new skin on Nick’s Camaro. “I spent a month in that shop after school learning how to sand and do bodywork,” Nick remembers. “I also added a Z28 scoop, side vents, and wing to the car.”

When it came time for paint, Nick knew what he wanted. “The car’s original color was Carmine Red, so I went with a third-generation Camaro color called Flame Red. It was a similar hue, but I had the guys at Northport add some extra flake for additional pop in the sunlight,” Nick says. “My Uncle Angelo’s IROC is painted that color, so I knew what it would look like.” Once completed, Nick took the car to several car shows and started getting involved in the local car scene. “I was hooked. I loved wrenching on cars and the community around it,” Nick adds.

Nick would dig deeper into the hobby a few years later when his buddies convinced him to run his Camaro at Maple Grove Raceway in Pennsylvania. “After the first pass I was once again hooked. I knew then what the future held for this Camaro,” Nick excitedly says.

In 2018 Nick got a call from a friend about a 383 stroker short-block for sale. Nick bought the engine and sent it to James at JA Performance in Lynbrook, New York, to get it freshened up. While that was taking place Nick pulled the original engine and transmission to further detail the engine compartment. At that point, Nick relocated the battery to the trunk, rewired the engine compartment, and upgraded the factory gauges with Dakota Digital pieces. The TH350 transmission was then sent out and rebuilt with a full manual valvebody by Fred Brown at FB performance in Bay Shore, New York.

Next, the engine and trans were brought to Moonlight Garage in New Hyde Park where Nick assisted with the top-end assembly. The short-block received some add-ons, including Edelbrock Performer RPM heads and Performer RPM Air Gap intake, which were both ported and polished by Frankie Ford. Richie Hoffman custom built a Holley 750-cfm carburetor, which supplies this stroker the go-juice it needs. Nick then took the engine back home to bolt on the Eddie Motorsports V Drive V-Belt engine accessory drive system prior to installing the mill back in the Camaro.

Once buttoned up and fully assembled, the car went back to Moonlight garage where they handled mostly everything else, including a rebuild of the original 10-bolt out back. Tommy Perito and Hoffman executed the work with perfection, as the twosome plowed through a hefty “to-do” list on the Camaro. They rebuilt the front and rear suspension, added in subframe connectors, and dialed in a Hurst Quarter Stick shifter. Once finished, they broke in the engine by bringing the car out in front of the shop for its first official burnout.

I loved the original Z28 hood scoops and I wanted to keep the look, but I needed clearance for the engine,” Nick states. “So, my good friend Steve Wider built me a tall, widened, and functional Z28 hood out of fiberglass. He made the scoop by sectioning two Z28 scoops and glassing them to the 2.5-inch cowl hood.”

Once completed, Nick looked back on the build. “The car is exactly how I wanted it to be: simple, aggressive-looking and sounding, and built to be driven hard,” Nick says. “My intention was to finish the car in time for the 2019 Super Chevy event at Maple Grove Raceway. I did in fact finish in time and ever since it has been a tradition of mine to race every year surrounded by my family and friends.

“This car constantly reminds me why I love hot rods. Not only from the sound of a healthy V-8 and the smell of race gas but learning about muscle cars and how to restore them at a young age with my father, to building it into my dream car, and now driving the wheels off of it,” Nick declares. “Muscle cars, the Camaro specifically, have been and will remain one of my life’s greatest passions.”