Unfortunately, the third-gen Camaro’s lack of power was a by-product of the government’s rage against horsepower and creating stringent smog laws that disallowed domestic automakers to build new cars with anything that resembled performance. Big-blocks and big-inch small-blocks capable of creating horsepower reminiscent of their ancestors of the late ’60s and early ’70s were all banned. In 1985 the Z28 and IROC Z28 came with a humble 215hp 305ci engine, but what the third-gen Camaro lacked in horsepower was made up in handling prowess. Even stock the car handled well and could pull 0.92 g’s on the skidpad in showroom trim. Because of that, Car and Driver magazine named the ’84 Camaro the “Best Handling Car Built in the United States.” If you wanted sports car–like handling performance in a relatively affordable package, you’d have to shell out around $11,000 to $14,000 for the IROC Z28. A bargain at the time? That all depended on your budget. But if you just had to have a Camaro, that was as good as it got.

Even with that lack of power, it had little effect on sales as GM was flinging out these plastic-bumpered Camaros off the assembly line like Chips Ahoy! cookies on a conveyer belt. Although the majority of the approximately 1.5 million were V-8 powered, many of them featured the measly four- and six-cylinder engines (four-cylinder discontinued in 1986), but none of that mattered to the gold chainers who bought one. To them, a Camaro was a Camaro and it was cool regardless of what engine was underhood. The sleek, sexy body lines set it apart from anything else.

Today, there’s still an ample supply of affordable, used third-gen Camaros ripe for picking. What makes that even better is that the aftermarket has been gradually offering replacement restoration and performance parts hoping to cash in on the third-gen Camaro’s big wave. So far that wave appears to be more like a ripple in the muscle car world, but Terry Kervin, owner of this ’85 Camaro likes to set trends—not follow them. “I wanted to own something different than the typical first- and second-gen Camaros that you see just about everywhere,” Terry says. “The third-gen Camaro deserves a lot of attention, so owners and builders just need to get creative with this platform.”

Terry hit up Jesse Greening and the team at Greening Auto Company (GAC) in Cullman, Alabama, to build a totally custom third-gen. GAC is known for building award-winning hot rods, many of which follow anything but the norm. “We’ve built a lot of common muscle cars and hot rods over the years, and we’ve also built quite a few non-traditional-style cars, so it’s exciting when someone asks us to build something different,” Greening says. “So when Terry approached us about building a third-gen Camaro, we jumped on it and were up for the challenge.”

Greening found an ’85 in Arizona that appeared to be in rough shape, but like most cars found in the desert, the sheetmetal showed little rust. With a solid canvas as a starting point, Greening got together with renowned automotive artist, Eric Brockmeyer and the duo went to work. “Terry let Brockmeyer and I loose in the creative department. Having no restrictions made it easy for us to come up with a unique build that would bring an ’80s Camaro into the modern muscle car world while still retaining that ’80s-era vibe,” Greening says.

With the rendering pinned on the wall for inspiration, the Greening gang took the iconic Camaro’s body, accentuated its sleek lines, reworked the front and rear fascia, and then integrated the ground effects to comply with the custom decklid and front spoiler. That trick GAC hood louver plays off the original, only this one actually promotes airflow into the engine bay unlike the factory piece that was for decoration only.

With the body mods complete, Autobahn Collision Center in Wapakoneta, Ohio, sprayed the F-body in a seductive layer of Glasurit Porsche Red accented with a flat black hood and Greening’s own IROC-Z stripe and graphic. For added flavor they added a carbon-fiber rear diffuser and accented the front spoiler with a carbon-fiber lip all done by Zach Ingram at Fiber Forged—but what also stands out is the custom GAC LED headlights that give Terry’s Camaro a seductive look all its own.

With the Camaro refined on the outside, a 440ci Don Hardy LS7 was fitted between the custom inner fender panels to coincide with this third-gen’s aggressive nature. The Greening crew dressed it with custom carbon-fiber valve covers from Fiber Forged and topped it with a Holley 1,000-cfm throttle body that pulls air through the custom GAC air cleaner prior to feeding the Holley single-plane intake manifold. A set of Ultimate Headers headers and 2.5-inch stainless exhaust raise hell before the MagnaFlow mufflers tone things down a bit. All that LS7 goodness makes its way to a GearFX rearend via the Bowler 4L85E transmission.

Yes, the third-gen Camaro’s stock suspension was adequate for the time, but to match this Camaro’s 640-plus horsepower it carries today, a Detroit Speed QUADRALink suspension resides out back, complete with double-adjustable JRi shocks. Up front, DSE tubular control arms along with their caster/camber plate is accompanied by DSE/JRi double-adjustable strut kit and sway bar. It’s all tied together with DSE subframe connectors for additional chassis stiffness and maximum handling performance.